Tetra 2" Vacuum Bottom Drain

Tetra 3" Bottom Drain

4 Inch Bottom Drain with Air Diffuser

FREE SHIPPING!!!

Inline vertical bottom drain. All Rhino attachments are machine fit for strength with no need for gap filling.

Large Bore horizontal dishcharge. All Rhino attachments are machine fit for strength with no need for gap filling.

Many pond builders have found that adding a bottom drain helps keep a pond cleaner. Fish waste and other muck that accumulates on a pond bottom can be easily removed by a bottom drain. Ponds that are over 2' deep can become stagnant without a bottom drain.

EasyPro 3" Heavy Duty Bottom Drain:

• Installed under the liner, flex PVC pipe carries the water under the liner to the skimmer box. Bulkhead fitting is installed in the skimmer, a PVC male adapter connects the flex PVC to the bulkhead fitting. The valve is placed inside the skimmer box to control flow. When the pump is turned on, water will flow into the skimmer through the skimmer faceplate (surface water) as well as the bottom drain.
• You can control how much water goes in through the top/bottom inlets with valve (included)
• Kits include bottom drain, bulkhead fitting, valve and fittings - does not include PVC pipe

EasyPro 4" Heavy Duty Bottom Drain:

• The popular EBD bottom drain has been redesigned for 2011, and is now available with or without air diffuser
• Welded FPT threaded inlet eliminates the need for rubber coupling
• Threaded center stand pipe securely attaches dome lid to base
• Sixteen stainless screws securely attach liner ring to base with water tight seal
• Heavy duty, roto-molded design offers superior strength
• For use with 4" schedule 40 PVC fittings and pipe, use 4" male adapter (MA40) to connect to 4" pipe, use reducing male adapter (RMA4030) to connect to 3" pipe

EasyPro Heavy Duty Bottom Drain with Air Diffuser

FREE SHIPPING!!!

Many pond builders have found that adding a bottom drain helps keep a pond cleaner. Fish waste and other muck that accumulates on a pond bottom can be easily removed by a bottom drain. Ponds that are over 2' deep can become stagnant without a bottom drain.

EasyPro 3" Heavy Duty Bottom Drain:

• Installed under the liner, flex PVC pipe carries the water under the liner to the skimmer box. Bulkhead fitting is installed in the skimmer, a PVC male adapter connects the flex PVC to the bulkhead fitting. The valve is placed inside the skimmer box to control flow. When the pump is turned on, water will flow into the skimmer through the skimmer faceplate (surface water) as well as the bottom drain.
• You can control how much water goes in through the top/bottom inlets with valve (included)
• Kits include bottom drain, bulkhead fitting, valve and fittings - does not include PVC pipe

EasyPro 4" Heavy Duty Bottom Drain:

• The popular EBD bottom drain has been redesigned for 2011, and is now available with or without air diffuser
• Welded FPT threaded inlet eliminates the need for rubber coupling
• Threaded center stand pipe securely attaches dome lid to base
• Sixteen stainless screws securely attach liner ring to base with water tight seal
• Heavy duty, roto-molded design offers superior strength
• For use with 4" schedule 40 PVC fittings and pipe, use 4" male adapter (MA40) to connect to 4" pipe, use reducing male adapter (RMA4030) to connect to 3" pipe
• EBD4A incorporates an air diffuser into the dome lid - incoming air is delivered up through the center stand pipe allowing air tubing to be installed under liner
• EBD4A tubing adapter is 1/2", recommended air flow through diffuser is .5 - 1.5 cfm

2" Elbow Bottom Drain

FREE SHIPPING!!!

For Smaller ponds use this 2" Elbow Bottom Drain. A smaller pump will allow the 2" intake to grab more water reducing pump pressure. This should be used with 2" PVC. Offset suction port, creates a swirl action inside the drain to help remove debris.

3" Elbow Bottom Drain

FREE SHIPPING!!!

This 3" Bottom Drain is best used for medium sized ponds.. A 3" intake allows your pump to reduce it's pump pressure. Should be used with 3" PVC. Offset suction port, creates a swirl action inside the drain to help remove debris.

4" Elbow Bottom Drain

FREE SHIPPING!!!

For larger ponds use this 4" Bottom Drain. A 4" intake allows for larger pumps to grab water from a larger area reducing pump pressure. Should be used with 4" PVC. Offset suction port, creates a swirl action inside the drain to help remove debris.

Bottom Drain Kit

FREE SHIPPING!!!

Includes
• 3" Inlet Screen
• 3" ABS Elbow
• 3" x 2" reducer
• 3 - 2"MNPT x 2" Slip Adapter
• 2 - 2" Polypropylene Bulkead
• 2" Slip x 2" Slip 90 Degree Elbow
• 2" Slip x 2" slip Gate Valve

Manual Flush
Bottom Drain Kit

FREE SHIPPING!!!

Includes
• Gate Valve
• 2" Bulkhead
• 2" MNPT x 2" Slip Adapter
• 2" x 25' Black Flexible Tubing

Atlantic 100% RTV Silicone Sealant/Adhesive