Laguna Non-Kink Tubing

FREE SHIPPING!!!

Super Flex

Non-Kink Tubing

FREE SHIPPING!!!

Strong and durable non-kink tubing will not collapse due to back-pressure or reasonable weight from gravel or cover material. The black color inhibits algae formation and is hard to see once installed. * Note - 25 ft section are pre-cut and will arrive as 25 ft sections. Due to different molding specs Super Flex tubing will ONLY work with PONDMASTER, ATLANIC, AQUASCAPES and OASE AQUAMAX Products.

Tetra Non-Kink Tubing

FREE SHIPPING!!!

For PVC pipe through 6". For all pipe schedules and classes. Perfect for DWV and Flexible PVC Piping.

Flexible PVC

FREE SHIPPING!!!

GOLD LABEL
Pipe Repair Tape

The Gold Label Pipe Repair tape is a great way to seal leaks on your pipes. Clean area to be repaired and simply apply self adhesive tape over leak and wrap around pipe. Make a few extra turns for a secure repair.

Laguna Stainless Steel Hose Clamps

Used to make a water tight fit for barb fittings. We recommend buying one size larger than you think you need. Example, if your tubing is 1 1/4", buy the 1 1/16" - 2" size because the 1 1/4" clamp only stretches to that size but will not fit over the tubing. Please call if you have any questions regarding this. 1-800-722-8877.

Laguna Multi-Hose Adaptor

Multi-hose adaptor (reducer).

Acrylic Saddle-Style Water Flow Meter

Oase Flow Regulator

Ball Valves

Ball valves allow you to reduce the flow of your pump or completely shut off water flow!

Single Union Ball Valve

Ball valves allow you to reduce the flow of your pump or completely shut off water flow! This is a 2" IPS Ball Single Union Ball Valve

2" Ball/ Swing Check Valve

FREE SHIPPING!!!

Laguna Y Connector

Emperor Aquatics 3-Way Ball Valve

Gate Valve

Clear Swing Check Valves

The swing check valves, when placed inline before an external pump, will always allow easy water flow until the pump is turned off or the electricity goes out. Once the pump stops suction, the swing check valve closes with a watertight seal keeping the water from back flowing. A check valve is a must when using an external pump above water level.

Standard Swing Check Valves

The swing check valves, when placed inline before an external pump, will always allow easy water flow until the pump is turned off or the electricity goes out. Once the pump stops suction, the swing check valve closes with a watertight seal keeping the water from back flowing. A check valve is a must when using an external pump above water level.

Bulkheads

Bulkhead fittings allow you to create a water tight seal while running tubing through objects, such as skimmers and biofalls!

Couplers

Tetra 2" Vacuum Bottom Drain

Tetra 3" Bottom Drain

4 Inch Bottom Drain with Air Diffuser

FREE SHIPPING!!!

Inline vertical bottom drain. All Rhino attachments are machine fit for strength with no need for gap filling.

Large Bore horizontal dishcharge. All Rhino attachments are machine fit for strength with no need for gap filling.

Many pond builders have found that adding a bottom drain helps keep a pond cleaner. Fish waste and other muck that accumulates on a pond bottom can be easily removed by a bottom drain. Ponds that are over 2' deep can become stagnant without a bottom drain.

EasyPro 3" Heavy Duty Bottom Drain:

• Installed under the liner, flex PVC pipe carries the water under the liner to the skimmer box. Bulkhead fitting is installed in the skimmer, a PVC male adapter connects the flex PVC to the bulkhead fitting. The valve is placed inside the skimmer box to control flow. When the pump is turned on, water will flow into the skimmer through the skimmer faceplate (surface water) as well as the bottom drain.
• You can control how much water goes in through the top/bottom inlets with valve (included)
• Kits include bottom drain, bulkhead fitting, valve and fittings - does not include PVC pipe

EasyPro 4" Heavy Duty Bottom Drain:

• The popular EBD bottom drain has been redesigned for 2011, and is now available with or without air diffuser
• Welded FPT threaded inlet eliminates the need for rubber coupling
• Threaded center stand pipe securely attaches dome lid to base
• Sixteen stainless screws securely attach liner ring to base with water tight seal
• Heavy duty, roto-molded design offers superior strength
• For use with 4" schedule 40 PVC fittings and pipe, use 4" male adapter (MA40) to connect to 4" pipe, use reducing male adapter (RMA4030) to connect to 3" pipe

EasyPro Heavy Duty Bottom Drain with Air Diffuser

FREE SHIPPING!!!

Many pond builders have found that adding a bottom drain helps keep a pond cleaner. Fish waste and other muck that accumulates on a pond bottom can be easily removed by a bottom drain. Ponds that are over 2' deep can become stagnant without a bottom drain.

EasyPro 3" Heavy Duty Bottom Drain:

• Installed under the liner, flex PVC pipe carries the water under the liner to the skimmer box. Bulkhead fitting is installed in the skimmer, a PVC male adapter connects the flex PVC to the bulkhead fitting. The valve is placed inside the skimmer box to control flow. When the pump is turned on, water will flow into the skimmer through the skimmer faceplate (surface water) as well as the bottom drain.
• You can control how much water goes in through the top/bottom inlets with valve (included)
• Kits include bottom drain, bulkhead fitting, valve and fittings - does not include PVC pipe

EasyPro 4" Heavy Duty Bottom Drain:

• The popular EBD bottom drain has been redesigned for 2011, and is now available with or without air diffuser
• Welded FPT threaded inlet eliminates the need for rubber coupling
• Threaded center stand pipe securely attaches dome lid to base
• Sixteen stainless screws securely attach liner ring to base with water tight seal
• Heavy duty, roto-molded design offers superior strength
• For use with 4" schedule 40 PVC fittings and pipe, use 4" male adapter (MA40) to connect to 4" pipe, use reducing male adapter (RMA4030) to connect to 3" pipe
• EBD4A incorporates an air diffuser into the dome lid - incoming air is delivered up through the center stand pipe allowing air tubing to be installed under liner
• EBD4A tubing adapter is 1/2", recommended air flow through diffuser is .5 - 1.5 cfm

2" Elbow Bottom Drain

FREE SHIPPING!!!

For Smaller ponds use this 2" Elbow Bottom Drain. A smaller pump will allow the 2" intake to grab more water reducing pump pressure. This should be used with 2" PVC. Offset suction port, creates a swirl action inside the drain to help remove debris.

3" Elbow Bottom Drain

FREE SHIPPING!!!

This 3" Bottom Drain is best used for medium sized ponds.. A 3" intake allows your pump to reduce it's pump pressure. Should be used with 3" PVC. Offset suction port, creates a swirl action inside the drain to help remove debris.

4" Elbow Bottom Drain

FREE SHIPPING!!!

For larger ponds use this 4" Bottom Drain. A 4" intake allows for larger pumps to grab water from a larger area reducing pump pressure. Should be used with 4" PVC. Offset suction port, creates a swirl action inside the drain to help remove debris.

Bottom Drain Kit

FREE SHIPPING!!!

Includes
• 3" Inlet Screen
• 3" ABS Elbow
• 3" x 2" reducer
• 3 - 2"MNPT x 2" Slip Adapter
• 2 - 2" Polypropylene Bulkead
• 2" Slip x 2" Slip 90 Degree Elbow
• 2" Slip x 2" slip Gate Valve

Manual Flush Bottom Drain Kit

FREE SHIPPING!!!

Includes
• Gate Valve
• 2" Bulkhead
• 2" MNPT x 2" Slip Adapter
• 2" x 25' Black Flexible Tubing

Atlantic 100% RTV Silicone Sealant/Adhesive

Mixing Eductor

FREE SHIPPING!!!

Mixing eductors are designed to easily multiply the mixing force of pumped water. The eductor requires as few as 450 GPH to draw in five times more for circulation. These eductors are molded of glass-filled polypropylene with smooth surfaces.

Polyethylene Strainer

The Polyethylene Strainer is designed to be put in the pond at the intake PVC of an external pump. This helps to block large debris and fish from entering your external pump basket.

Laguna Float Valve

FREE SHIPPING!!!

Keeps pond water at desired levels. Replinishes water loss. Adjustable to various settings. Includes multi hose adapter so it can handle hoses from 1/4" hose - 3/4" hose. It is a good idea to use Water Prep every week when using a float valve.

Little Giant Discharge Kits for Skimmers

Priming Pots (Leaf Baskets)

FREE SHIPPING!!!

The Priming Pot is designed to facilitate priming the pump and suction line. It is not intended to prime (remove air from) the suction line. It also provides a strainer basket to trap large debris. The Priming Pot is intended for use when your pump is situated above water level. The pot is not intended for the positive pressures found when the pump is substantially below water level.

NOTE: 2" Priming pot includes a 1.5" outlet and a 2" adapter