The Sera Koi Master Test Kit is our most comprehensible test kit ever. This test kit tests for ten individual items within the water. Included with this test kit are 4 measurement vials, 1 syringe and directions for testing. The convenient carrying case makes this easy to transport between indoor aquariums and outdoor ponds.

Calpump Test Kits

Digital Salinity Tester

FREE SHIPPING!!!

Calibration Solution for Digital Salinity Tester

The Calibration Solution for the Digital Salinity Tester is a great way to make sure your digital salinity tester is accurate. Just open the packet and place the tester into the solution. Using the screw driver that was included with the tester, adjust the calibration screw until the digital display reads 6.44 ppt. You may re-seal packet and re-use at a later date. For optimal use calibrate tester once every 2 - 3 weeks.

Laguna Test Kits

Aquarium Pharmaceutical Test Kits

Tetra test Kits

Microbe-Lift Test Kits

Calpump Ammonia Test Kit

The Calpump Test Kits are the most innovative test kits on the market. Most test kits require you to constantly take samples of the water and test it, the Calpump Test Kit offers a simpler way of testing your pond water. Just place the test kit into the pond water and anchor it using the lanyard provided. Once fully wet it will start monitoring the water. For best results replace test kit every 4-6 weeks.

Laguna Ammonia Test Kit

API Ammonia Test Kit

Mircobe-Lift Ammonia Test Strips

API Phosphate Test Kit

Mircobe-Lift Phosphate Test Strips

Nitrate Test Kits

Having high Nitrate levels in your pond are associated with surface algae outbreaks; a build-up of organic pollants and poor fish health. It is important to test your Nitrate levels weekly, so that, if detected, steps can be taken to remove it. Common algae problems that are a result of Nitrate are String Algae and Blanket Weed.

API Nitrate Test Kit

Mircobe-Lift Nitrate / Nitrite Test Strips

Nitrite Test Kits

It is very important to watch your Nitrite levels as low levels will inhabit your pond fishes respiration and will weaken your fishes immune system. Very high levels of Nitrite can cause suffocation and fish death. The key thing here is to keep your Nitrtite levels balanced. Nitrite is produced in the pond by either fish waste or un eatten fish food. The Nitrite Test Kit is a must have for any new pond as there is a very good chance that the water will have high levels of Nirtite until the pond cycles.

API Nitrite Test Kit

Mircobe-Lift Nitrate / Nitrite Test Strips

pH Test Kits

Pond fish require a specific pH range to thrive. There are several factors that can effect the pH level in the pond, for example fish waste, addition of tap water, rain water, stones that are high in lime content and the build up of natural acids in your pond. It is important that you test your pH levels daily and to do so around the same time each day. The reason for testing around the same time each day is that pond plants can effect the pH level as well

Calpump pH Test Kit

The Calpump Test Kits are the most innovative test kits on the market. Most test kits require you to constantly take samples of the water and test it, the Calpump Test Kit offers a simpler way of testing your pond water. Just place the test kit into the pond water and anchor it using the lanyard provided. Once fully wet it will start monitoring the water. For best results replace test kit every 4-6 weeks.

Laguna pH Test Kit

API pH Test Kit

Salt Test Kits

If you decide to use salt in your pond as either a treatment or a preventative, it is extremely important to know what your salt levels are. If the levels are too high, you can harm your fish as high levels of salt will burn your fish. You can also cause plant loss as well. On the other hand, if your using salt as a treatment parasites and the level is low, it could render the treatment itself useless.Something important to remember is that one pound of salt per hundred gallons equates to a salinity of 1.25 ppt (0.125% or 1250 ppm).

Digital Salinity Tester

FREE SHIPPING!!!

Calibration Solution for Digital Salinity Tester

The Calibration Solution for the Digital Salinity Tester is a great way to make sure your digital salinity tester is accurate. Just open the packet and place the tester into the solution. Using the screw driver that was included with the tester, adjust the calibration screw until the digital display reads 6.44 ppt. You may re-seal packet and re-use at a later date. For optimal use calibrate tester once every 2 - 3 weeks.

Copper Test Kits

Copper is used as a common treatment for parasitic infection. When using copper in hospital tanks, it is important that you monitor the levels. Levels that are too low will be ineffective; while, levels that are too high could result in fish loss

API Copper Test Kit

Hardness Test Kits

Carbonate Hardness levels should be tested weekly as they can fluctuate over time and can result in unstable pH levels. If you have a low Carbonate level, it can effect pond plant growth and could contribute to water quality problems.  High hardness levels  are the main factor in unsightly mineral deposits found on water features such as fountains and spitters

Laguna Hardness GH Test Kit

Multi-Test Kits

The Sera Koi Master Test Kit is our most comprehensible test kit ever. This test kit tests for ten individual items within the water. Included with this test kit are 4 measurement vials, 1 syringe and directions for testing. The convenient carrying case makes this easy to transport between indoor aquariums and outdoor ponds.

Laguna Master Test Kit

API 5 in 1 Test Strips

Mircobe-Lift 5 in 1 Test Strips

Tetra EasyStrips 5 in 1 Test Strips