Lake / Pond Fountains and Aeration

   The SB-1A Solar Pond Aerator provides critical oxygen to the pond bottom, aerate from the bottom up. This Lake Aerator includes the duraplate diffuser, which has been sized to the unit's compressor to provide optimizing oxygen transfer rate and waters turnover efficiency. Waterfalls and recirculation often fall short providing adequate oxygen to the pond. The on-board timing system allows adjustment and aeration cycling to match critical nighttime hours when oxygen levels are the lowest. When mechanical failure or power outages may occur, the solar unit will continue to provide oxygen to help save your fish. Never pay another dime for electrical costs to aerate your pond. This kit comes with 50' of Alpine self-weighted airline and will aerate for 20 hours each day. Has an auto control. Permanent Magnet, Brushless, type 12 volt DC compressor, 0.85 amps 0.32 SCFM (Cubic Feet Per Minute), 9 lpm air flow @ 7 psi maximum pressure, 80 watt BP Solar panel, metered charge controller 2.5" pole mount, recycled plastic cabinet with sound reduction package, 100 amp hour sealed battery, 50' self weighted air line (1) fine bubble 10" duraplate all black, check valve fittings package. Customer must furnish 2.5" X 8'-10' SCH 40 steel pipe to mount 80 watt panel. WARRANTY: 1 Year on mechanics, 20 years on solar panel, 5 years on diffuser.

• Our 1/2hp,120 volt, high output pump assembly, high impact housing (stainless steel available, SEE ACCESSORIES), continuous duty, water cooled, stainless steel motor. CSA listed. (NO chance for oil leak.).
• 26" professional series, black poly float, molded brass inserts for attaching a light kit, tapered design for low visibility from shore.
• 100' of power cable, standard with the unit, non-wicking. (Additional lengths available @ $42.50 per 50' or @ $85.00 per 100')
• GFCI (ground fault circuit interrupt) protection with plug end. (Included on every configuration).
• Four nozzle patterns: Geyser, Trumpet, Wide V, & Center Geyser with V (adjustable)
• Energy efficient pump assembly delivers 68 gallons per minute (4100 gph) yet operates at only 750 watts, keeping operating costs at a minimum.
• Easy to assemble (no tools required).
• Operates in shallow waters.
• Large displays, differing per nozzle, ranging from 10-16 feet in height, to 3-25 feet in width.
• One year limited warranty.

• Our 1/3hp 120 volt, high output pump assembly with high impact outer housing and water cooled stainless steel motor, is built for continuous duty.
• 26" professional series. black poly float. Molded brass inserts for attaching our light kit. Tapered design for low visibility.
• 50' of powercable standard with the unit.(non-wicking).
• GFCI (ground fault circuit interrup) protection with plug end.
• Four nozzle patterns; Tall Trumpet, Trumpet, Wide V and Center Geyser with V (adjustable);
• Energy efficient pump assembly delivers 2100 gph at only 300 watts--keeps operating costs at a minimum.
• Operates in shallow waters. Minimum required depth is two feet.
• Display heights and widths differ per nozzle, ranging from three to six feet in height and three to ten feet in width.
• One year limited warranty.