Hikari BiFuran+ 2.2 lb – Treats 1030 Gallons – 73501

Description

BiFuran+ is a powder-based formulation of two powerful and proven active ingredients that was developed to offer the hobbyist an effective way to treat microbial bacterial and protozoan disease conditions in their aquarium or pond. This revolutionary, extremely safe and super effective product offers you benefits no other like product can!

Directions:

Bath: For external, nitrofuran susceptible, microbial diseases of marine and freshwater aquarium and pond fishes, use 1 capful (~9.7g) per 10 gallons (38L) of water. Partial or complete water change (using Ultimate or a combination of Stress-X and ClorAm-X) must be made just prior to the beginning of treatment and every 24 hours thereafter with redose for up to 7 days or unti improved condition is noted or losses cease. If improvement is not noted within three (3) days, discontinue treatment and consider other therapy.

Short-Term Dip For Marine Fishes: Mix the proper amount of BiFuran+ into a container of conditioned freshwater (using Ultimate or a combination of Stress-X and ClorAm-X) and place the diseased fishes into the container with gentle aeration. Allow the fishes to remain in this dip treatment until they can no longer remain upright or show other signs of osmotic stress (typically no longer than 1 minute). After treatment return the treated fishes to normal seawater for recovery. Repeat daily as needed.

Oral: For systemic (internal) infections, Bifuran+ can be fed mixed with fish food or preferably used as part of a prepared food.

DO NOT OVERDOSE – this means you should calculate the actual amount of water in your tank by multiplying the length x width x height and dividing by 238 to get the true gallons. Please also deduct the amount of space consumed by substrate (gravel, sand, etc.) rock, decorations or other things which are displacing water.

NOTE: We do not recommend using any sulfur or sulfinite-based water conditioners with this product. If your normal water conditioner does not list the ingredients please verify with the maker that it does not contain these ingredients. If you notice any rotten egg smell to the product, it likely does have these ingredients and should be avoided as it could cause the product to be less effective and the dissolved oxygen levels to be negatively impacted.

Use BiFuran+ for microbial disease treatment for bacterial diseases or protozoan diseases for freshwater, marine or pond fishes.

Ingredients:

Nitrofurazone & Furazolidone (Active Ingredients); Sodium Cloride, Synthetic Polymers & a Chelating Agent.

Caution:

Avoid skin and eye contact. Avoid breathing powder or dust (use of a painter’s mask suggested). Use in an area with minimal air movement to prevent blowing of powder or dust. In case of contact with eyes, rinse immediately with plenty of water for at least 15 minutes. Get medical attention. In case of skin contact, wash with mild soap and plenty of warm water.

Care should be taken to avoid over-dosing as this can result in fatalities and will not speed healing. It’s important to calculate the exact amount of water in your system (exclusive of substrate, rocks, decorations, filtration or other additions) to avoid an overdose.

Because we care: BiFuran+ has been developed to offer assistance to aquarium or pond keepers who are encountering problems with bacterial or protozoan diseases who are looking for a safe and effective treatment.

FOR AQUARIUM OR POND USE ONLY. NOT FOR HUMAN MEDICAL, VETERINARY OR FOOD USE. 

CALIFORNIA PROP 65 WARNING: This product is known to contain detectable amounts of a chemical or chemicals known to the State of California to cause cancer, birth defects or other reproductive harm.